A small pump capable of moving large quantities of diesel and oil Transfer pumps make short work of moving diesel or hydraulic oil from a drum to a tank or reservoir. The Jabsco 12V transfer pump packs a lot of power into a small package. Ideally suited for 50-200 gallon tanks this self-priming pump is designed to function in all sorts of conditions: from -22F in Alaska to 104F in Baja. The cast iron body features two mounting feet for permanent installations. An integrated switch, fuse and barbed fittings for 1" hose makes set up quick and easy. An IP55 rating gives users the confidence that this pump will standup to moderate exposure to dust and spray.NOTE: Do not use this pump for transfer/pumping of petrol, gasoline or products witha flash point below 37C (99F).Do not dry run. Operation requires a circuit that is properly fused. Key Features Self-priming up to 9'6" and 32' of head Integrated switch and included fuse makes set and use quick and easy IP55 rating allows pump to installed in exposed locations Functions in -22F to 104F Rated for continuous use Ideal for tanks up to 200 gallons One-year limited warranty Specifications Use: Diesel, Kerosene, Paraffin and Hydraulic oil transfer Pump Type: Rotary sliding vane Voltage: 12V Amperage: 12A DC Capacity: 13gpm (diesel) Port Size: 1" barbed Lift: 9'6" Head: 32' Height: 5 7/8" Width: 5" Length: 9" Data Sheet